Integrasi Konsep Teaching Factory Pembuatan Kursi dan Meja dari Daur Ulang Limbah Plastik

Abstract

Keywords

References

• Aji, P. T., Nasuha, A., Irmawati, D., Musaddid, A. T., Sofyan, A. H., & Hakim, S. R. (2025). Development of teaching factory model in vocational. Vocational Applied Research and Studies, 2(1).
• Ayu Marlina, Sari, A. N., Syahira, N. A., Syafarina, P., & Bintang, R. S. (2023). Edukasi mengenai pentingnya pemilahan serta pengolahan sampah untuk mengurangi dampak negatif terhadap lingkungan. Inovasi Pengabdian dalam Penerbangan, 4(1).
• Bolong, N., Saad, I., Asman, N. S. A., Choong, W. H., & Roslan, Z. (2024). Feasibility of recycled HDPE planks for sustainable furniture applications: A physio-mechanical study. MATEC Web of Conferences, 397, 03005. https://doi.org/10.1051/matecconf/202439703005
• Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020). Degradation rates of plastics in the environment. ACS Sustainable Chemistry & Engineering, 8(9), 3494–3511. https://doi.org/10.1021/acssuschemeng.9b06635
• Haba, B., Djellali, S., Abdelouahed, Y., Boudjelida, S., Faleschini, F., & Carraro, M. (2025). Transforming plastic waste into value: A review of management strategies and innovative applications in sustainable construction. Polymers, 17(7). https://doi.org/10.3390/polym17070881
• Idris, I., Putri, D. Z., Azhar, Z., Martha, J., & Yeni, I. (2021). Willingness to participate analysis of urban waste management in West Sumatra, Indonesia. Jurnal Perspektif Pembiayaan dan Pembangunan Daerah, 9(2), 115–126. https://doi.org/10.22437/ppd.v9i2.12119
• Imran, I., Marji, M., Suswanto, H., & Adhikari, B. P. (2024). The influence of Teaching Factory (TEFA) implementation and work readiness on vocational high school students’ future job perspectives. Jurnal Pendidikan Vokasi, 14(1), 86–96. https://doi.org/10.21831/jpv.v14i1.66796
• Istiyani, A., & Handayani, W. (2022). Embedding community-based circular economy initiatives in a polycentric waste governance system: A case study. The Indonesian Journal of Planning and Development, 7(2), 51–59. https://doi.org/10.14710/ijpd.7.2.51-59
• BPS Kabupaten Minahasa Utara. (2023). Kabupaten Minahasa Utara dalam angka 2023 (Vol. 7106.2302). https://minutkab.bps.go.id/id/publication/2023/02/28/20561c29e06350c65e251103/kabupaten-minahasa-utara-dalam-angka-2023.html
• Kurniawati, M., Mustikowati, R. I., Sundayagara, C., Anggraini, I. D., Lestari, R. T. I., & Maulida, S. (2024). Optimalisasi value added limbah plastik dengan teknologi mesin crusher. Jurnal Pengabdian Masyarakat Bhinneka, 3(2).
• Nurhasanah, N., Ahman, E., & Yusuf, S. (2022). Pengembangan model pembelajaran teaching factory. Jurnal Basicedu, 6(5), 7986–7993. https://doi.org/10.31004/basicedu.v6i5.3723
• Nurilma, S., Jayadi, N., Desain, J., & Seni Rupa, F. (2020). Potensi pengembangan produk kreatif furnitur plastik daur ulang berwawasan eco-design di Yogyakarta. [Nama Jurnal Tidak Tercantum], 15(1).
• Ofori-Agyei, G. O., Baah, O. P. K., Adom, D., Amankwa, J. O., & Abedi, A. (2023). Upcycling of solid waste for furniture production: An environmentally sustainable solution for waste disposal. Journal of Innovations and Sustainability, 7(4), 04. https://doi.org/10.51599/is.2023.07.04.04
• Purno Tri Aji, Nasuha, A., Irmawati, D., Musaddid, A. T., Sofyan, M. A. H., & Hakim, S. R. (2025). Development of teaching factory model in vocational higher education. Journal of Vocational Applied Research and Studies, 2(1), 15–20. https://doi.org/10.21831/jvars.v2i1.1452
• Rachman, I., Komalasari, N., & Hutagalung, I. R. (2021). Community participation on waste bank to facilitate sustainable solid waste management in a village. Journal of Environmental Science and Sustainable Development, 4(2). https://doi.org/10.7454/jessd.v4i2.1123
• Rahmawati, Mone, A., & Mustari, N. (2021). Pengaruh partisipasi masyarakat terhadap efektivitas program inovasi desa budi daya jamur tiram di Desa Jenetaesa Kecamatan Simbang Kabupaten Maros. Jurnal Kajian Ilmiah Mahasiswa Administrasi Publik, 2. https://journal.unismuh.ac.id/index.php/kimap/index
• Asman, S. A., Raymond, M. B., Mohamad, H. M., & Bolong, N. (2023). Life cycle assessment of plastic waste into furniture using OpenLCA software. Transactions on Science and Technology, 10(2). http://tost.unise.org/
• Sitomorang, R., Sumardi, H., Simbolon, K., Warni, M. S., & Harefa, M. S. (2023). Tingkat kesadaran kurangnya pemahaman masyarakat tentang daur ulang limbah sampah plastik masyarakat TPS. Jurnal Wilayah, Kota dan Lingkungan Berkelanjutan, 2(2), 48–59. https://doi.org/10.58169/jwikal.v2i2.236
• Sun, Y., & Qin, J. (2023). Introduction of a new line of high-density polyethylene (HDPE) based furniture. International Journal of Innovation, Management and Technology, 14(1), 7–12. https://doi.org/10.18178/ijimt.2023.14.1.931
• Tazyeen, R., Gowda, S., & Gowda, N. N. (2024). Recycled plastic as a wood substitute in interior design. Trends in Emerging Research and Development, 2(6). https://doi.org/10.5281/zenodo.14593491
• World Bank. (2021). Plastic waste discharges from rivers and coastlines in Indonesia. Marine Plastics Series, East Asia and Pacific Region. Washington, DC. Washington DC. www.worldbank.org

Author Biographies

• Steven Runtuwene, Politeknik Negeri Manado

  Program Studi Teknik Informatika, Politeknik Negeri Manado, Kota Manado, Provinsi Sulawesi Utara, Indonesia.

• Winda Sanni Slat, Politeknik Negeri Manado

  Program Studi Teknik Mesin Produksi dan Perawatan, Politeknik Negeri Manado, Kota Manado, Provinsi Sulawesi Utara, Indonesia.

• Adolf Tonny Rasuh, Politeknik Negeri Manado

  Program Studi Teknik Mesin Produksi dan Perawatan, Politeknik Negeri Manado, Kota Manado, Provinsi Sulawesi Utara, Indonesia.

• Djefry Paulus Hosang, Politeknik Negeri Manado

  Program Studi Teknologi Rekayasa Mekatronika, Politeknik Negeri Manado, Kota Manado, Provinsi Sulawesi Utara, Indonesia.

• Oldi Malfri Lambonan, Politeknik Negeri Manado

  Program Studi Teknik Listrik, Politeknik Negeri Manado, Kota Manado, Provinsi Sulawesi Utara, Indonesia.

License

Copyright (c) 2025 Steven Runtuwene, Winda Sanni Slat, Adolf Tonny Rasuh, Djefry Paulus Hosang, Oldi Malfri Lambonan

This work is licensed under a Creative Commons Attribution 4.0 International License.

This is an open-access journal. All articles are distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Under this license, you are free to:

• Share: Copy and redistribute the material in any medium or format.
• Adapt: Remix, transform, and build upon the material for any purpose, even commercially.

Attribution Requirements:
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

Copyright and Retention:
Authors retain copyright without restrictions and grant this journal the right of first publication under an open-access model. The journal retains non-exclusive publishing rights for archiving, indexing, and scholarly dissemination.

Usage Statistics